The Builder’s intention was to build a mini ITX motherboard based system, especially because he is just going to put a video card. He plans to upgrade later to an Asus Strix AMD Rx 64. Then, a mini ITX does not occupy him much on the desktop and looks fantastic. Enough for the programming and design tasks he performs.
The following guide is based on UniBeast Guide, but If you do not have access to Mac, You can Install Mojave with Hackintosh Mojave Installer, Which does not require access to mac to create a bootable Mojave Installer.
Prepare USB Installer with UniBeast
Insert the USB drive
Open /Applications/Utilities/Disk Utility
Highlight the USB drive in left column (Note: in the Mojave version of Disk Utility, you must first select View / Show All Devices before you can see the USB drive there)
Click Erase button
For Name: type MOJAVE (You can rename it later)
For Format: choose Mac OS Extended (Journaled) and GUID Partition
Peripherals ⇾ USB Configuration ⇾ Legacy USB Support : Enabled
Peripherals ⇾ USB Configuration ⇾ XHCI Hand-off : Enabled
Chipset ⇾ Vt-d : Disabled
Chipset ⇾ Internal Graphics : Enabled (After changing this and the other options, you must restart to show the two options DMVT)
Chipset ⇾ DVMT Pre-Alloc : 64M
Chipset ⇾ DVMT Total GFX Mem : 256M
Chipset ⇾ Above 4G Decoding : Enabled (In a restart apparently this option hurts to start and hanged, now is enabled and without problems).
Save and Exit, The system will restart with the saved data
-->
Install Mojave
Restart or Turn on the computer
Hold F12 during BIOS to enter boot menu
Select your USB, In Clover options Click “Install Mojave”
When installer boots, enter Disk Utility and format “Erase” your SSD, named “Mojave OSX”. Choose the recommended filesystem option (Journaled) and Guid Partition.
Exit Disk Utility
Install Mojave
Note: if computer restarts during this time, do not worry. Installation will take a number of restarts before completion (3 to be exact). From here on out, On each restart you press F12 and select the USB and Clover options select your main SSD, you see the options in clover with the name of SSD Mojave OSX (Or the name you have chosen).
Install Clover in SSD
Now we will install clover on the SSD to not have to always start the USB.
Run the Clover installer – You can get it from here
-->
Continue, continue, continue
In type of installation click on “Personalize” and just select the following.
UEFI Starter Installation
Install clover on the ESP partition
The themes if you want you can leave it
In UEFI Drivers, just select the 4 main drivers: ApfsDriverLoader-64, ApioMemoryFix-64, EmuVariableUefi-64, HFSPlus
It’s the same, because then we’ll replace the EFI folder.
I don’t see the EFI dowload — nor can I find how to sign up (thinking, perhaps, I must login to the site to see downloads)
Attached.
Hi, where is your EFI link?
Attached.